Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Austin 16 King pin removal #7887
    Merlin
    Participant

    Hello Ken,

    Sounds like you’re doing well and it needed doing.

    Hopefully this might help, zoom into the expander units and you should Front brakefind what you’re looking for

    in reply to: Austin 16 King pin removal #7845
    Merlin
    Participant

    Hello Ken,

    Sorry I’ve been away, seeing that the pin is parallel it could go either way.

    The welch plug is easy to replace and should be in the king pin kit, I replaced the bushes on mine as it seemed worthwhile when it was apart. (If the plugs are missing they are easy to get on Ebay)

    You will off course need a reamer to fit the bushes so if that’s a problem and they are ok leave them alone.

     

    in reply to: Austin 16 King pin removal #7831
    Merlin
    Participant

    Hello Ken,

    When I did mine I removed the bottom welch plug from the bottom of the swivel axle and pushed it out, if you are going to replace the bushes the plug needs to be removed any way.

    Both of mine were worn so were replaced and reamed to size.

     

    in reply to: Austin 12 & 16 running boards #5505
    Merlin
    Participant

    Hello Mike ,

     

    I am very interested in the running boards and any parts you have for my A16 restoration.

    So please keep me in mind after Pete.

     

    Thanks, Pete  W

    in reply to: A16 bs1 steering box #3081
    Merlin
    Participant

    Hello number5,

    Many thanks for your response, I think I may have solved it now.

    I have sourced a modern seal with the correct dimensions, all I have to do is get the box machined a few mm deeper and hopefully it should work ok.

    Merlin

Viewing 5 posts - 1 through 5 (of 5 total)