Forum Replies Created
-
AuthorPosts
-
August 13, 2026 at 10:24 pm in reply to: Austin Hereford, won’t start/attemot to start…..just backfires #13392
jbaustincountiesPH74HR
ParticipantHello, just to say, as a follow-up….a friend of a friend called by….and showed an interest in my A70. We worked on it together..checking and re-checking points gap, plug gaps etc (ie. all the usuals). The plug leads were already marked 1,2,3,4 from the front (not the firing order..just to which plug the lead goes). By time we were finished, the leads, from the front were 4,3,2,1,,,,,no, I don’t understand either as to what I did/why the order had changed….enough to say, the A70 now starts well/runs well…happy days…next shows: Ladybank (Fife) and Scone (Perthshire). Now just need to sort the vapour lock….any thoughts anyone? jb
February 18, 2024 at 9:48 pm in reply to: Advice sought for late 1953 Austin Hereford with heavy/very heavy steering #8493jbaustincountiesPH74HR
ParticipantHello Pete,
Many thanks for your reply (of Dec 22, 2023)…and sincere apologies for such a late response. I received your email just before Christmas..and I think the festivities/The Macallan must have erased from my memory, the need to reply!
You mention that steering on these cars is heavy..especially when not in motion.
You also mention tyre pressure. I’ll check pressures and will likely inflate to at least 35psi.
The Hereford came with radials (for, I think, taxis)..I wonder if crossplys would help?
The needle bearing roller kit sounds interesting..and I will investigate this kit if the heavy steering persists.
I likely won’t go down the power steering route.
I was at the Morrris Leslie classic car auction in Errol, Perthshire yesterday..and got talking to Ian Walker of Ian Walker Commercials, Renfrew. Ian suggested, I think, that the problem could be seized kingpin bearings..and has suggested a way of checking this. I’ll follow Ian’s suggestion as soon as I get back to working on the Hereford.
I will update the forum with any improvements to the heavy steering.
Thanks again,
John
-
AuthorPosts
Recent Comments