Rear axle hub flange stud question

[ThunderBA40]

The rear hub flange in my 1951 Austin A40 Devon car has all the studs broken off.
Catalogs all show part #1A7709 as the correct replacement.
However that particular item appears to be a press in unit, whereas the ones in the hub currently appear to be threaded.
Is there a threaded replacement available?

Not sure how to post photos. Looking at the hub, are what appears to be threads in the holes, and the remnants of the stud from the back side also showing threads.

• This topic was modified 1 month, 1 week ago by ThunderBA40.

[ThunderBA40]

After drilling out what was left of a stud and removing the remnants, I discovered that it is threaded.
The thread is BSW 5/16-18
I cannot find a stud like this anywhere on the internet.
Guessing others have used the serrated press in studs as replacements.

[Author]

Posts