Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 23, 2025 at 11:23 am in reply to: Austin 16 H.P. intake-to-exhaust bolts / set screws #9779
    mixolydian
    Participant

    Hello,

    Thanks John and apologies for the late reply. I tried Longbridge but sadly to no avail.

    However, I was able to find a suppler able to provide the right spec bolt.

    For future reference I ordered four 5/16″ * 22 * 2 1/4″ BSF bolts (grade R) from Arun Fasteners. Note: that’s 22 threads per inch and these are bolts rather than set screws. They’re almost identical to what I removed and have worked a treat.

    Link:
    https://arunfasteners.co.uk/product/bsf-part-thread-bolts-grade-r-bsf-b/

    Excellent service from Arun; dispatched very promptly, absurdly well packaged and exactly the right spec.

    The manifolds, carb, linkages and fuel system are all back in place and working properly.

    March 11, 2025 at 1:03 am in reply to: Zenith Carburetor parts supplier #9661
    mixolydian
    Participant

    I appreciate this is an old thread, but just in case (and for future reference) – it’s worth trying Burlen Fuel Systems.

    Their main website: https://burlen.co.uk/

    Direct link to the Zenith parts for the A40: https://zenithcarb.co.uk/carbspec/carburettor/spares/id/2871/

    I believe part number ZRK26 is for the full rebuilt kit (“Rebuild kit – For a Single 30VM Carburettor”).

    I hope this helps – very best of luck.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)