› Forums › General Counties Cars Discussion › overheating

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 22, 2021 at 7:09 pm #4137
    southernscouse
    Participant

    hi i have a devon van that overheats no oil in water and no water in the oil even compression on all cylinders i have flushed the rad and engine all i can think of is the waterpump the bearings are ok but how can i check the flow

    thermostat is 78 degree and works in boiling water   am i missing something

    cheers tom

    August 24, 2021 at 9:42 pm #4143
    southernscouse
    Participant

    Thanks for the reply have sent a email to GAT about cost

    timing my Devon has always been a bit hit and miss it has electronic ignition so no points there are no marks on the front of the engine my method has been to get the engine running and then turn the dizzy to get the best result

    August 24, 2021 at 11:36 pm #4145
    southernscouse
    Participant

    Hi Dave just read a post of yours to someone else in2020 about how to set the timing will give that a go.  Thanks

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.