- This topic has 1 reply, 2 voices, and was last updated 6 months, 3 weeks ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Where do I purchase these rubber parts? Not shown are more metal and rubber combination parts attached to the baffle plates and on top of the body where the bonnet rests. I need those parts as well.
Greg, I made mine very cheaply. Very simple if you can work a Stanley knife and a steel rule. Its just a rectangle with 2 holes. I bought some 10mm (i think) thick rubber sheet from ebay.
I also made some, not original, but do the job, buffers for the top of the body . They definitely reduced the vibration and noise!
scroll down to the bottom of this page and you’ll see:
Alternatively , you can buy them here:
https://www.scottsoldautorubber.com.au/Austin%201948-52%20A40.htm
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Recent Comments