› Forums › General Counties Cars Discussion › A40 Devon 1949

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 16, 2020 at 5:22 pm #1773
    suri2
    Participant

    Hi All,
    please help. I need replace head gasket on A40 1200ccm and don’t know, how much torque is required to tighten. The manual describes the tightening procedure, but not the force required. I don’t want to hurt a pet.
    Many thanks for help.

    suri

    February 17, 2020 at 9:03 pm #1777
    suri2
    Participant

    Hi Dave,
    thank you very much for very helpful advice. I’ll do it for the first time. I will also check all the recommended points. Thanks a lot again and I’ll let you know how I did it.
    Regards
    suri

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.