Why the keeping of the pedal depressed can work I don’t know-told to me by a Healey 100-4 owner when I was having some problems years ago, and it did give results. It may be that the MC has to be removed to thoroughly clean it and install a new seal kit. With the front brakes, have you checked the adjustment clearances, and also if the wheel cylinders in each are returning to their normal closed positions. I do know that the two small holes at the end of the piston must be aligned correctly at the rear face of the inner seal, to enable returning fluid to enter the small recess on the centre of the seal,allowing it to pass through the washer into the cylinders non pressurized section, otherwise it does create a problem.
Cheers-Peter
Recent Comments