Forums General Counties Cars Discussion Devon rubber/metal parts needed Reply To: Devon rubber/metal parts needed

#8649
MikeN
Participant

Greg, I made mine very cheaply. Very simple if you can work a Stanley knife and a steel rule. Its just a rectangle with 2 holes. I bought some 10mm (i think) thick rubber sheet from ebay.

I also made some, not original, but do the job, buffers for the top of  the body . They definitely reduced the vibration and noise!

scroll down to the bottom of this page and you’ll see:

https://www.oldclassiccar.co.uk/forum/phpbb/phpBB2/viewtopic.php?t=21798&postdays=0&postorder=asc&start=15

Alternatively , you can buy them here:

https://www.scottsoldautorubber.com.au/Austin%201948-52%20A40.htm

 

  • This reply was modified 1 month, 1 week ago by MikeN.
  • This reply was modified 1 month, 1 week ago by MikeN.
  • This reply was modified 1 month, 1 week ago by MikeN.