Thanks for the information, I’ll post some photos when I can. What you described is correct. I have dressed up the clamp faces and guide plate, and ensured enough clearance so the clamp is free to rotate with the distributor clamped. The vacuum adjuster rod /nut will be set at 0 deg and then connected to the vacuum unit and tightened. Hopefully then just to fine tune it?
Recent Posts
- Membership Renewals Due 31st December
- Book Written by Club Member Wins Prestigious RAC Motoring Book of the Year Award
- Additions to ‘County Counsel’ Online Archive
- Discount Code Now Available for March ‘Practical Classics’ Restoration Show at the NEC, Birmingham
- Reminder – 2024 Membership Available Now – Your 2023 Membership Expires on 31st December.
Archives
Categories
Calendar of Posted Items
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| 1 | ||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| 16 | 17 | 18 | 19 | 20 | 21 | 22 |
| 23 | 24 | 25 | 26 | 27 | 28 | 29 |
| 30 | 31 | |||||
Recent Comments