› Forums › General Counties Cars Discussion › cylinder head woes › Reply To: cylinder head woes
March 14, 2019 at 9:21 pm
#1523
Participant
Hi Dave thanks for the reply I did take the head off again and annealed the solid copper gasket and refitted it my problem is very strange you can see small bubbles at the head joint nearest the bulkhead on the spark plug side I have checked cylinder compression all four are good and very close to each other after 1000 miles the engine has lost no oil or water starts on the button and drives ok my only mistake seems to be that I torqued the nuts down when hot if I have to take the head off again I will follow your advice to the letter. Thanks tom
Recent Comments